Carpentry courses
Craftsmanship | PASSION | Creativity
Discover our course offerings
Step into the world of craftsmanship and discover traditional woodworking at its finest.
Our carpentry courses are designed for both passionate craft enthusiasts and those just beginning their journey with hand tools and working with natural wood.
The workshops are highly practical — we share the knowledge and skills we use daily in our woodworking studio, where we create furniture for applied art galleries and interior designers.
Courses take place in a fully equipped woodworking studio. Everything you need is provided on-site: tools, materials, safety equipment, sanitary facilities, as well as coffee, tea, and fresh fruit.
Upon request, participants receive a personalized certificate confirming completion of the course.
Bensari Workshop is registered in the National Register of Training Institutions (RIS), which allows our course participants to apply for funding through the National Training Fund (KFS).
Woodworking from Scratch
One-Day Carpentry Course: Woodworking Basics. A one-day woodworking course covering the fundamentals of carpentry. During the course, you’ll get hands-on experience with essential hand tools such as saws, planes, and chisels. You’ll learn about their structure, uses, safety principles, and—most importantly—how to use them effectively by crafting your own wooden knife stand.
Weekend courses start at 9:00 AM, while weekday sessions begin at 2:00 PM.
The course lasts 1 day, approximately 7 to 8 hours.
25.04.2025 (5 available slots)
10.05.2025 (3 available slots)
11.05.2025 (4 available slots)
30.05.2025 (5 available slots)
14.06.2025 (6 available slots)
15.06.2025 (6 available slots)
27.06.2025 (6 available slots)
11.07.2025 (6 available slots)
26.07.2025 (6 available slots)
08.08.2025 (6 available slots)
23.08.2025 (6 available slots)
24.08.2025 (6 available slots)
Mortise and Tenon Joints
Mortise and Tenon – Two-Day Carpentry Course. A two-day woodworking course focused on mortise and tenon joints. During the course, participants will independently create a traditional cutting board — without the use of glue — built entirely using mortise and tenon joints, along with spring pins that reinforce the entire structure.
The course begins at 9:00 AM.
Duration: 2 days, 8–9 hours per day.
31.05.2025 (1 available slots)
12.07.2025 (5 available slots)
Learning to Use a Hand Plane
One-Day Course: Learning to Use a Hand Plane. A one-day course dedicated to mastering the use of hand planes. During the session, you’ll learn proper hand tool techniques that allow you to achieve a smooth, even wood surface quickly and effortlessly. You’ll also discover how to plan the flattening process and how to properly prepare your tools — including the hand plane and scraper.
Weekend courses start at 9:00 AM, and weekday sessions begin at 2:00 PM.
Course duration: 1 day – 6 hours.
27.07.2025 (6 available slots)
Dovetails
Dovetail Joints – Two-Day Carpentry Course. A two-day woodworking course focused on crafting dovetail joints. During the workshop, you’ll learn how to create one of the most essential and time-tested joinery methods — known for providing lifetime durability when done correctly. You’ll gain hands-on experience in cutting precise dovetails and learn the key details to watch for during assembly to ensure your project is both strong and visually refined.
The course begins at 9:00 AM.
Duration: 2 days, 8–9 hours per day.
26.04.2025 (0 available slots)
28.06.2025 (5 available slots)
09.08.2025 (5 available slots)
Hammer veneering
Veneering and Steam-Bending – Two-Day Carpentry Course. A two-day woodworking course focused on veneering and steam-bending techniques. Veneering is a nearly forgotten craft that requires skill and precision but offers incredible decorative possibilities in return. During the course, you’ll learn how to work with hide glues, prepare veneer sheets, and use steam to bend wood into elegant, curved shapes.
You’ll put these skills into practice by crafting and veneering a decorative wooden tray with curved elements formed using steam.
The course begins at 9:00 AM.
Duration: 2 days, 8–9 hours per day.
17.05.2025 (0 available slots)
Woodturning Pens
Pen Turning – One-Day Carpentry Course. A one-day woodworking course focused on turning pens and pencils from wood. During the workshop, you’ll get familiar with the structure and safe operation of a wood lathe. You’ll learn how to use turning chisels, as well as sanding and polishing materials essential for fine finishing.
Each participant will create their own wooden pen or pencil, using pre-made metal components.
Weekend courses start at 9:00 AM, while weekday sessions begin at 2:00 PM.
Course duration: 1 day – 6 hours.
06.07.2025 (1 available slots)
Stolik kawowy
Tocząc w naturalnym materiale, jakim jest drewno, uzyskujemy niepowtarzalny wzór, co sprawia, ze wykonane przez nas przedmioty maja unikalny charakter. Samodzielnie wytoczony długopis lub pióro to doskonały pomysł na prezent, dla siebie lub kogoś bliskiego.
Participant Reviews
Gift Idea
Give the gift of experience
Looking for a gift idea for a woodworking enthusiast? Give a voucher for any workshop or a custom amount.
